Barco R9050100 User Manual Download Page 98

Page: 98 / 233

9. Image menu

Image 9-98

Image 9-99

9.6.6

Copy a

How to copy?

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Image

and press

ENTER

3. Use the

▲

▼

key to select

File services

and press

ENTER

The File service menu is displayed.

4. Use the

▲

▼

key to select

Copy

and press

ENTER

The copy window opens.

5. Use the

▲

▼

key to select the

le which must be copied.

6. Press

ENTER

to select.

The copy window opens. The

rst character is selected.

7. Use the

▲

▼

key to change the selected character.

Use the

◄

►

key to selected another character.

Note:

Digits can be entered with the digit keys on the remote control or on the local keypad. When a digit is entered in that
way, the next character will be selected automatically.

8. Press

ENTER

nalize the copy action.

Image 9-100

Image 9-101

Image 9-102

Image 9-103

Image 9-104

9.6.7

File options

How to set the options?

1. Press

MENU

to activate the menus.

R59770021 CLM R10+ 15/03/2010

Summary of Contents for R9050100










































































































































































































































Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands

Barco R9050100, User Manual

Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands