Barco R9050100 User Manual Download Page 156

Page: 156 / 233

13. Projector control

Image 13-64

Image 13-65

Image 13-66

13.9 Local LCD contrast

What is possible?

The contrast of the local LCD can be adapted to the needs of the environment.

How to change?

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Projector control

and press

ENTER

3. Use the

▲

▼

key to select

Local LCD contrast

and press

ENTER

4. Use the

▲

▼

key to adjust the local contrast.

Image 13-67

Image 13-68

Image 13-69

13.10 Language selection

What can be done?

The user can change the language of the on screen menus and the local display menus to one of the available languages.

The following languages are available:
•

English

•

French

•

German

•

Spanish

•

Italian

All available languages are indicated in the language of the country. The current active language is indicated by an asterisk (*).

How to change the language

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Projector control

and press

ENTER

152

R59770021 CLM R10+ 15/03/2010

Summary of Contents for R9050100










































































































































































































































Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands

Barco R9050100, User Manual

Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands