Barco R9050100 User Manual Download Page 181

Page: 181 / 233

16. Servicing

Image 16-9
Take out the lamp

For recycling guidelines of the lamp, see "Recycling guidelines", page 8.

16.6 Mounting a new lamp unit

About the lamp units

All four lamp units are equal. A spare lamp can be inserted in any position without problems. See spare part list for the order
numbers.

ARNING

This procedure may only be performed by quali

ed technical service personnel.

AUTION

Never attempt to disassemble the lamp from its housing or to dispose of it. Due to its high internal

pressure, the lamp may explode in either hot or cold states if improperly handled. For recycling guidelines,
see "Recycling guidelines", page 8.

AUTION

Never touch the re

ector or the lamp bulb with your

ngers. That will reduce the lifetime of the

lamp.

Never touch the UV

lter when a lamp is removed.

Necessary tools

No tools.

How to insert a lamp unit

1. Insert the lamp vertically into the housing, with the front of the lamp facing the middle of the projector.

R59770021 CLM R10+ 15/03/2010

177

Summary of Contents for R9050100










































































































































































































































Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands

Barco R9050100, User Manual

Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands