Barco R9050100 User Manual Download Page 187

Page: 187 / 233

17. Projector covers, removal and installation

17. PROJECTOR COVERS, REMOVAL AND

INSTALLATION

Overview

•

Removal of the front cover

•

Removal of the lamp door

•

Removal of the back cover

•

Removal of the top cover

•

Removal of the side cover

•

Installation of the side cover

•

Installation of the top cover

•

Installation of the back cover

•

Installation of the front cover

•

Installation of the lamp door

ARNING

The cover removal procedures may only be performed by quali

ed technical service personnel.

17.1 Removal of the front cover

Necessary tools

Flat screwdriver

How to remove the front cover

1. Release the captive screw at the middle bottom of the front cover (a)

Image 17-1
Release captive screw

2. Release the front cover from the projector doing the following:

a) stand in front of the projector and pull the bottom side of the cover a little toward you (b)
b) In that slightly pivoted position, pull the cover downwards to release it from the top cover (c)

R59770021 CLM R10+ 15/03/2010

183

Summary of Contents for R9050100










































































































































































































































Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands

Barco R9050100, User Manual

Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands