Barco R9050100 User Manual Download Page 192

Page: 192 / 233

17. Projector covers, removal and installation

Image 17-11
Fixate side cover

17.7 Installation of the top cover

How to install

1. Place the top cover on the projector and push on the front side and back side of the cover until it clicks into its locks (4 locks).

Image 17-12
Mount top cover

2. Secure the cover by turning the captive screw clockwise.

17.8 Installation of the back cover

How to install

1. Hook the back cover on the top and side covers so that the edges of all three covers are

xed in the back cover. No open space

allowed between two covers.

Image 17-13
Mount back cover

2. Secure this position by turning the 3 captive screw clockwise.

188

R59770021 CLM R10+ 15/03/2010

Summary of Contents for R9050100










































































































































































































































Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands

Barco R9050100, User Manual

Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands