R9001440/9
GRAPHICS
Panel Adjustments
Date:10/02/2000
6300
8
Lining up the white rectangles with the
TCR Tracker modules.
Loosen the wing nut on each TCR Tracker
unit and move the unit along the stand until
the two generated white rectangles match
the sensors on the respective TCR Tracker.
When the white rectangles match the respective sensors, Press ENTER on
the local key board or on the RCU to start the panel adjustment procedure.
The automatic panel adjustment process adjusts consecutively the following items:
- Field Flicker adjustment for Red, Green and Blue.
- GAIN adjustment for for Red, Green and Blue.
- Blacklevel adjustment for Red, Green and Blue.
At the end of the adjustment process, duration of about a few minutes, the following
message appears on the screen: SAVE TO DEFAULT. Press ENTER to store the
default values in the projector.
Panel Adjustments
USER GUIDED
1. Panel Settings
2. User Guided
3. Service
4. Save to Default
0. EXIT
Press a key