R9001440/9
GRAPHICS
TCR Adjustment procedure
Date:10/02/2000
6300
31
TCR Adjustment procedure
Example
: input B for choice (without ENTER)
TCR procedure V1.30
Step 4: Adjustment for the different Color Temperatures
3200K: x=......
y=......
Adjust Blue Balance
+ increase
- decrease
X exit
The following controls are accessible:
- R : change gain red with + and -. Will mostly affect the x coordinate (+ increases x,
- decreases x).
- G : change gain green with + and -. Will mostly affect the y coordinate (+ increases
y, - decreases y).
- B : change gain blue with + and -. Affects both x and y coordinates (+ decreases x
and y, - increases x and y).
- S : save the color balance in the projector after the x and y coordinate are properly
adjusted. The gain red and gain blue values are read and presented. If the values
appear normal (i.e. no 255) they can be saved in the projector.
- X: Exit, to next color temperature
Adjust gain blue with + and - affects both x and y coordinates (+ decreases x
and y, - increases x and y).
If the value for x- and y- has reached the value as mentioned in table on
proceeding page, input S to save the color balance in the projector. The gain
red and gain blue values are read and presented. If the values appear normal
(i.e. no 255) they can be saved in the projector.
TCR procedure V1.30
Step 4: Adjustment for the different Color Temperatures
Do you want to save this color balance to 3200K ? (Y/n)
Gain red=142
Gain blue=72
Input Y(es) to save this color balance alignment, followed by X to go to the
next color temperature.
Adjust the color ballance for the other color temperature in the same way as
described above. At the end of the color temperature adjustment of 9300K,
program returns to the startup screen.
Proceed now to item Checking the Color Tracking
