R9001440/9
GRAPHICS
Panel Adjustments
Date:10/02/2000
6300
5
Panel Adjustments
Caution
PANEL ADJUSTMENT TO BE PERFORMED BY
QUALIFIED BARCO PERSONNEL ONLY
The adjustment procedure must be performed with great care. Panel settings
have a dramatic influence on the light output, contrast ratio and color tracking
of the projector.
Recommendation
- Before starting any adjustment procedure, first, clean the not replaced panels and
analyzers (see the respective cleaning kit: Art. No R5976057)
- In case of a Software update (see procedure Info T 331), execute first the update
before starting the panel, uniformity and TCR adjustments.
Reasons for Adjustment
Have the adjustment procedure performed after the following occurrences;
1) Replacement of an LCD Panel.
2) Replacement of the LCD Driver Module.
Projector settings
Before starting any adjustment procedure, first, set for the projector the Baudrate on
9600 and the address on 001, as follows,
Select with or
then <ENTER>
<EXIT> to return.
Panel Adjustment
Set Up
1) The projector must be set up in a
table mounted configuration
.
2) The room where the procedure is to be performed must be darkened.
Starting up the Service Mode
Push the
cursor key
é
or
ê
to highlight
'Service' and then press ENTER.
Some items in the Service mode are pass-
word protected (when the password function
is active). Enter the password to continue.
All other password protected items are now
available if you stay in the adjustment mode.
The service menu is built-up in two parts
which are connected together with the 'more'
item.
If the desired item is not in the list of the
displayed menu, select 'more' with the cur-
sor key and push ENTER to display the other
items in the service menu.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE...
Select with or
then <ENTER>
<EXIT> to return.
