Barco Galaxy WARP 7 HC, Owner'S Manual

Page: 23 / 154

4. Connections
4. CONNECTIONS
Overview
• Power connection
• Switching On
• Switching to standby
• Switching off
• Input Connections
• Communication Connections
• Stereo Connections
4.1 Power connection
AC Power cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector
at the left of the projector. The power input is 230 VAC.
Fuses
The projector is protected with an automatic circuit breaker of 15A which is built in into the power switch.
4.2 Switching On
How to switch on ?
1. Press the power switch to switch on the projector.
- When ’0’ is visible, the projector is switched off.
- When ’1’ is visible, the projector is switched on.
The projector starts in standby mode. The projector indication lamp is red.
Starting image projection
1. Press
Stand by
key once on the local keypad or on the remote control. (image 4-1)
The projector mode indication lamp will be green.
Or,
Press a digit button to select an input source.
COLOR
CONTRAST
PHASE
SHARPN
TINT
BRIGHTN
STANDBY
ENTER
TEXT
EXIT
PAUSE
2 1
4 3
5 6
8
0
9
7
F1
F2
F3
F4
F5
ADJ EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE BALANCE
BASS VOL
9 0
7
8
5 6
3 4
1 2
1
Image 4-1
Stand by keys on RCU and local keypad
R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004 19