Barco Galaxy WARP 7 HC, Owner'S Manual

Page: 107 / 154

6. Random Access
Image 6-48
Basic Shape set up for Projector 2
6.5.7.9.8 Soft Edge Width Start up
When Soft Edge is not installed on the projector or when the Soft Edge Active mode is set to [OFF] this menu
item will be grayed out.
What can be done with the Soft Edge Width menu ?
Within this menu the width of the blending zone is set up.
How to Start up the Soft Edge Width menu ?
1. Push the cursor key ↑ or ↓ to highlight
Soft Edge
. (menu 6-118)
2. Press
ENTER
to select.
The
Soft Edge Width
barscale, displaying the width in % (Range from 00.0 to 25.5 %), will be displayed. (image 6-49)
BLANKING/SOFT EDGE
ACTIVE [ON]
BLANKING
SOFT EDGE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-118
SOFT EDGE WIDTH TOP
0.0
Image 6-49
The Soft Edge Width barscale
6.5.7.9.9 Soft Edge Width selections
How to use the Soft Edge Width selection ?
1. Press
ENTER
to scroll through all available Soft Edge Width selections: top, bottom, left and right. (image 6-50)
R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004 103