Barco Galaxy WARP 7 HC, Owner'S Manual

Page: 137 / 154

8. Service Mode
8.6.3 Changing the Common Address
How to Change the Common Address?
1. Push the cursor key ↑ or ↓ to highlight the active
Common Address
e.g. (RC5). (menu 8-10)
2. Press
ENTER
to select.
CHANGE PROJECTOR ADDRESS
PROJECTOR ADDRESS 6
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with
↑
or
↓
then <ENTER>
Reprogram with
↑
,
↓
,
←
,
→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 8-10
Entering the new Common Address
1. Enter with the digit keys on the RCU or the local keypad
Or,
pushing the cursor key
↑ or ↓ until the new value is reached.
Only addresses between 0 and 1 are valid.
8.7 Change Baudrate PC
What can be done?
The baudrate of the projector must be the same as the baudrate of the connected computer. Use this menu to change the baudrate
of the projector.
The following baud rates are available:
•
115200
• 57600
• 38400
• 19200
• 9600
• 4800
• 1200
R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004 133