Barco Galaxy NW R9040406, User Manual

Page: 76 / 209

5. Advanced
Quick check of the active stereo image
1. Make sure that both previous procedures in this section have been performed in a correct way.
2. Open the Source selection drop down menu: both the connectors that have been linked to the Sources should have a bullet to
indicate that they are currently displayed.
L1 PC
L1 DVI
L3 DVI-1
L3 DVI-2
Source selection
Image 5-39
Two sources displayed simultaneously (bullet); one source available (Barco logo)
3. Browse to Installation > Scaled patterns and select Moving Hatch...
Image 5-40
You should now see the Moving Hatch pattern and the Left image content at the same time.
5.5 Image fi les
Overview
• Introduction to Image fi les
• Load fi le
• Forced fi le load
• Auto Image
• Edit
• Save as (create a custom fi le)
• Rename fi le
• Copy
• Delete
5.5.1 Introduction to Image fi les
Image fi les
An image fi le contains the main characteristics of a source (number of active lines,...). The projector’s memory contains a list of fi les
corresponding to the most common sources : standard fi les.
70 R59770718 GALAXY NW SERIES 20/06/2013