Barco Galaxy NW R9040406, User Manual

Page: 41 / 209

3. Setup
3. SETUP
Overview
• Powering up the projector
• Starting up the projector
• Setting up the Remote Control Unit address
• Setting up the projector address (only if necessary)
• Setting up the orientation
• Adjusting the lens
• Setup the baud rate for serial communication
• Preferences
• Setup of Linked projectors in a Multichannel system
3.1 Powering up the projector
How to power up the projector ?
1. Switch the power switch to “1”
DVI DVI DVI DVI 1 2
DESKTOP INPUT DESKTOP INPUT
IN1 IN1 IN2 IN2
L1 L1
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
L2 L2 L3 L3
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
RS 232 C RS 232 C DVI DVI R.C. R.C.
Image 3-1
Mains power switch
2. The software will be initialized. This may take up to 30 seconds. During this phase the LCD display is lit (1). The initialization is
followed by the keypad lighting up brie fl y (5 seconds) and the projector Standby status (2) .
Galaxy NW-12 standby
1
2
Image 3-2
Switch ON sequence
R59770718 GALAXY NW SERIES 20/06/2013 35