Barco Galaxy NW R9040406, User Manual

Page: 49 / 209

3. Setup
Always select the highest rate unless otherwise speci fi ed.
3.8 Preferences
Overview
• Language setting
• Automatic startup
• Change password
3.8.1 Language setting
How to change the Language ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Language
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired language
Image 3-18
7. Press ENTER
The language is adapted and a bullet shows the active selection.
3.8.2 Automatic startup
What can be done ?
The automatic startup allows to bypass the standby state i.e. start up without going in standby state after switching on the projector.
This means that the automatic startup allows immediate restart of the projector after a power failure (breakdown), i.e. without passing
through the standby state, by recovering the previous settings (previous source,...).
This function can be disabled if undesired or inadequate for safety reasons.
R59770718 GALAXY NW SERIES 20/06/2013 43