Barco Galaxy NW R9040406, User Manual

Page: 19 / 209

2. Installation
360°
Image 2-6
Projector tilt range
C
AUTION
:
Not respecting the projector tilt range causes lamp fl icker or even premature lamp failure.
Service area
Make sure that suf fi cient free space (area free from obstacles - see the image below) should be available around the projector for
maintenance and service activities.
200 mm 200 mm 200 mm 500 mm
500 mm 500 mm
Image 2-7
Dimensions: free space around the projector
2.3 Battery Installation in the RCU
How are the batteries delivered ?
The batteries (not yet installed to save the battery life time) are delivered inside the plastic bag with the power cord.
How to install
1. Remove the battery cover on the backside of the remote control by pushing the indicated handle a little towards the bottom of
the RCU.
2. Lift up the top side of the cover at the same time.
3. Insert the 2 new 1,5 V batteries as indicated in the RCU.
R59770718 GALAXY NW SERIES 20/06/2013 13