Barco ClickShare, Service Manual

Page: 79 / 124

8. Web Interface
Image 8-21
Fixed IP address
The Advanced tab is displayed.
3. Check the radio button next to Fixed address (3).
The IP address, subnet and gateway input opens.
4. Click in the input fi eld of the IP address and fi ll out the 4 fi elds.
Note: An address contains 4 octets with a maximum value of 255.
This must NOT be 0.0.0.0 for static IP-Address assignment
5. Click in the Subnet mask input fi elds and fi ll out the 4 fi elds as appropriate for the local subnet.
6. Click in the Default Gateway input fi elds and fi ll out the 4 fi elds. Set the Default-Gateway to the IP-Address of the router (MUST
be on the local subnet!).
Note: This must NOT be 0.0.0.0.
If there is no router on the local subnet then just set this fi eld to any IP-Address on the subnet.
7. Click Apply to con fi rm the changes.
8.13 Advanced settings: WiFi settings
W
ARNING
:
It is not allowed to operate the Base Unit outside its intended geographical region.
About WiFi
A connection with the Base Unit can be made via a wireless connection. A fi xed wireless IP address is used to establish the con-
nection.
How to set up
1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
R5900006 CLICKSHARE 04/12/2013 67