Barco ClickShare, Service Manual

Page: 101 / 124

9. Software updating
Image 9-7
Press the Standby button at the front if the unit does not start up automatically.
5. On the keyboard, press F12 .
Press F12 immediately after starting up the Base Unit and keep it pressed until a message appears on screen asking to enter a
password.
Image 9-8
6. Enter ’clickshare’ as password.
Beware when entering the password as the Base Unit will assume a QWERTY keyboard.
The following screen appears.
Image 9-9
Note: The brand of the software recovery stick may vary.
7. Select the software recovery stick and press Enter.
R5900006 CLICKSHARE 04/12/2013 89