3. Getting started
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
_____________________________________________________________________
3-5
35
power switch of individual power module
36
LED: individual power module operating
Figure3-3
rear view of A
RGUS
P
ROCESSOR
On the left hand side is the
mains connection
[25]. At the case of the A
RGUS
P
ROCESSOR
for redundant operation
there is for both of the two power modules a
mains connection
[25] and additionally a
power switch
[35] and
an
LED
[36], indicating operation of the power module, if lightened. In the middle of the power modules there is
the air supply [14].
The
remote power on/off connector
[16] is for connection to A
RGUS
O
MNI
B
US
devices.
With the optional connec-
tors
external genlock in
[17] and
external genlock loop through in
[15] an external genlock signal can be
connected to multiple P
ROCESSORS
and O
MNI
B
US
devices.
PS/2 mouse
[26 ] is for plugging in a PS/2 mouse and
PS/2 keyboard
[27] is for plugging in a PS/2 keyboard. If available with network adapter [32] the network
connection can be established.
On the right hand side there are different cards [19-24] inserted depending on the actual hardware configuration
of your A
RGUS
P
ROCESSOR
.
To protect A
RGUS
P
ROCESSOR
from overheating, the air supply openings in the case shall be
kept free of obstructions!
To disconnect A
RGUS
P
ROCESSOR
from the power supply all power cords have to be pulled of
the mains connection [25]. Therefore the back panel has to be easily accessible!
The expansion slots
The A
RGUS
P
ROCESSOR
provides six PCI expansion slots for insertion of link interface cards, network cards, VGA
graphic card and Multiport I/O Cards. Depending on the model of the P
ROCESSOR
, the numbering varies. In the
models
AGS-3328-2
and
AGS-3328-3
they are numbered in the following way:
PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6
Figure 3-4
numbering of PCI slots on the back panel of A
RGUS
P
ROCESSOR
AGS-3328-2/3
In the models
AGS-3270-0
,
AGS-3328-0
and
AGS-3328-1
they are numbered in the following way:
Figure 3-5
numbering of PCI slots on the back panel of A
RGUS
P
ROCESSOR
AGS-3270, AGS-3328-0/1
In the following sections reference is taken to the numbering of the slots.