3. Getting started
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
_____________________________________________________________________
3-7
The back the O
MNI
B
US
looks like this or similar:
5
6
7-13
21-24
26b
27b
26a
27a
25
14-20
28
5
CPU board
6
link interface card
7-13
graphic cards
14-20
O
MNI
S
CALER
21-24
input cards
25
air supply
26a, 26b
power switch (
a
standard power module,
b
optional redundant power module)
27a, 27b
mains connection (
a
standard power module,
b
optional redundant power module)
28
connection for equipotential bonding conductor
Figure 3-7
back of A
RGUS
O
MNI
B
US
On the upper part of the back of the O
MNI
B
US
there are different cards. On the left there is the
CPU board
[5] and
the
link interface board
[6], followed by
graphic cards
,
O
MNI
S
CALERS
and
input cards
[7-24] depending on the
configuration of A
RGUS
.
On the right of the lower part is the standard
mains connection
[27a] and the
power switch
[26a]. On the left
side there might be another
mains connection
[27b] and the
power switch
[26b] for a second power module
for redundant operation, depending on the configuration of the A
RGUS
. To the left of the standard mains connec-
tion there might be a
connection for the equipotential bondig conductor
[28].
To protect the O
MNI
B
US
from overheating, the air supply openings in the case shall be kept
free of obstructions!
To disconnect the O
MNI
B
US
from the power supply all power cords have to be pulled of the
mains connection [27a] and [27b]. Therefore the back panel has to be easily accessible!
