3. Getting started
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
___________________________________________________________________
3-53
Finishing the configuration
****************************************************************
Distributed X Server setup done... Have fun!
NOTE: enter "service mmtserv"
to start the EOS X Server
****************************************************************
When configuration is completed, you can enter
service mmtserv
to start the X server:
eos:/opt/MMT2686/config # service mmtserv
If you operate A
RGUS
in eXtended safety boot mode, please take care to update the backup
partition after successful configuration, see section
4.8.5 Backup and restore procedures (eosxs