![background image](http://html1.mh-extra.com/html/barco/argus-x-terminal/argus-x-terminal_user-manual_3822608053.webp)
3. Getting started
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
___________________________________________________________________
3-35
3.3
Starting up
3.3.1
Connecting
First of all you have to provide the appropriate power supply. Plug in the power cables on the back panel of the
A
RGUS
devices. Please, refer to section
Mouse and keyboard must be connected to the respective sockets on the rear of the P
ROCESSOR
respectively the
central processor. Please, refer to sections
Connect the link interface and remote power on/off cables to the A
RGUS
devices. If an external genlock signal is
used connect it also to the A
RGUS
. Please refer to
Connect the graphic cards to the O
MNI
S
CALERS
, if O
MNI
S
CALERS
are used. Connect the display devices to the graphic
cards or O
MNI
S
CALERS
. At least one display must be connected for administrating A
RGUS
. Please, refer to
. Connect the video and RGB sources to the video-input cards of A
RGUS
. Please,
!
Connect the A
RGUS
P
ROCESSOR
to the local area network by connecting the network to the network card or the
network onboard adapter! Please, refer to section
For configuring a distributed system, the central device must be connected to a monitor.
Refer to section
, please! Connect the rendering machines with the central
processor and the O
MNI
B
US
devices with the rendering processors. Refer to section
, please!