3. Getting started
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
_____________________________________________________________________
3-9
3.2
Cabling
3.2.1
Power supply
Check the power rating on your outlet before connecting A
RGUS
to the wall outlet or to a
power strip. Contact your facilities manager or a qualified electrician if you are not sure
what type of power is supplied to your building.
A
RGUS
is designed to operate with single-phase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not plug into any other type of power
system.
To connect P
ROCESSOR
and the O
MNI
B
US
devices to the power supply, follow these steps:
•
If using an O
MNI
B
US
with redundant power supply first connect an equipotential bondig conductor to the
connector [28].
•
Plug the female end of the power cords into the mains connections of each P
ROCESSOR
[25] and O
MNI
B
US
[27]
respectively.
Figure 3-9
Mains connection of A
RGUS
•
Plug the male end of each power cord into a power outlet.
3.2.2
Mouse
The standard mouse is a PS/2 mechanical mouse. Plug it into the
PS/2 mouse
jack [26].
Figure 3-10
PS/2 mouse jack
3.2.3
Keyboard
The standard keyboard is a MF-II type keyboard with a PS/2 connector. Plug it into the
PS/2 keyboard
jack [27].
figure 3-11
PS/2 keyboard jack