Bante Instruments Bante900P, Instruction Manual

Page: 44 / 47

BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER 43
Addendum 1: Optional pH Electrodes
Bante900P portable meter is equipped with a general purpose pH electrode, if it can not fully meet your measurement requirements,
please refer to the table below to select an applicable sensor.
SAMPLE TYPE P11 P12 P13 P14 P16 P17 P18 P19 P20 P21
Agar ■
Beer ■ ■ ■ ■ ■ ■ ■
Blood Products ■ ■ ■ ■ ■
Bread, Dough ■ ■
Cement ■
Cosmetics ■ ■ ■ ■ ■ ■
Dairy Products ■ ■ ■ ■ ■
Education ■ ■ ■ ■
Fats/Cream ■
Field Use ■ ■ ■ ■
Fish Products ■ ■
Lab Flasks ■
Low Ionic ■ ■
Meat, Cheese ■ ■
Micro Samples ■
Paint ■ ■ ■
Photographic
Soil ■ ■
Surface ■
Test Tubes ■ ■
Tris Buffer ■
Viscose Samples ■
Addendum 2: How to prepare the pH electrode storage solution
■ Dissolve 22.365 grams of potassium chloride reagent (KCL) in the 100mL distilled water.
■ Pour the 50mL of KCL solution into the beaker.
■ Pour the 50mL of pH4.01 standard buffer solution into the same beaker.
■ Stir the solution until the solution has thoroughly mixed. Preparation is completed.