Bante Instruments Bante900P, Instruction Manual

Page: 9 / 47

BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER 8
DISSOLVED OXYGEN MODE:
PARAMETER DESCRIPTION OPTIONS DESCRIPTION DEFAULT
Calibration Points:
Select the number of calibration points
1 point ■
2 points
Pressure Coefficient:
Select the default atmospheric pressure coefficient
Range: 450~850mmHg 760
Salinity Coefficient:
Select the default salinity coefficient
Range: 0.0~50.0ppt 0.0
Resolution:
Sets the resolution for Dissolved Oxygen measurement
0.01mg/L ■
0.1mg/L
Measurement Unit:
Sets the default measurement units
Degrees Celsius ■
Degrees Fahrenheit
mg/L Milligrams per liter ■
ppm Parts per million
mmHg Pressure unit ■
kPa Pressure unit
GENERAL OPTIONS:
PARAMETER DESCRIPTION OPTIONS DESCRIPTION DEFAULT
Stable Criteria:
Sets the stability standard for measurement or
calibration.
When the “LO” option is enabled, measuring
value will stabilize quickly, but reading is less accurate.
When the “HI” option is
enabled, measuring value will
stabilize slowly, but guarantees high accuracy.
Low ■
High
Auto-Hold:
When the auto-hold function is enabled, the meter will
automatically sense a stable endpoint reading and freeze
it.
Enable
Disable ■
Auto-Power Off:
When the auto-off is enabled, if you do not press any key
within a specified time period, the meter will
automatically turn off to conserve energy.
10 minutes
20 minutes
30 minutes
Disable ■