BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER
1
Introduction
Thank you for selecting the Bante900P portable multiparameter water quality meter. This manual provides a step-by-step guide to help you
operate the meter, please carefully read the following instructions before use.
Unpacking the Meter
The following list describes the standard accessories of the meter. After the unpacking, please check all accessories are complete. If any
are damaged or missing, please contact nearest distributor.
ACCESSORIES:
■
pH electrode,
conductivity electrode, dissolved oxygen probe, temperature probe
■
pH buffer pouches (pH4.01, 7.00, 10.01), conductivity calibration solutions (84µS/cm, 1413µS/cm, 12.88mS/cm), DO electrolyte
solution, membrane cap and batteries
Display
Bante900P portable meter is equipped with a clear and bright LCD display that used to show measured values, mode indicators and
message indicators.
INDEX:
Measurement mode indicator:
Indicates meter is in the measurement mode
Low Battery Alarm:
When battery is depleted, the indicator will disappear
Calibration mode indicator:
Indicates meter is in the calibration mode
Stable indicator:
Indicates the measured value has stabilized
Setup mode indicator:
Indicates meter is in SETUP mode
Hold indicator:
Indicates the displayed value has been frozen
Memory mode indicator:
Indicates data is stored into memory
Calibration Due Reminder:
Prompts user to calibrate the meter regularly
Electrode slope indicator:
Indicates the average slope of the pH electrode
Automatic Temperature Compensation:
Indicates meter is in the temperature compensation mode
