BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER
9
Calibration Due:
When calibration due reminder is enabled, if you do not
recalibrate meter within a specified time period, the
meter will automatically show
indicator.
…
1~31 days
Disable
■
Date and Time:
Sets the date and time of the meter.
---
---
Clear stored data:
Clear all stored measured values.
Enable
Disable
■
Reset:
Reset function allows user to restore the meter back to
factory default parameters. When this function is
enabled, all calibration values and selected system
parameters will be lost or reset.
Enable
Disable
■
Setting the Default Parameters
1. If necessary, press MODE key until the display shows corresponding mode indicator (e.g. pH mode).
2. Press and hold the
key for 3 seconds, the meter enters setup menu, the display shows selectable parameter and page number.
3. Press
or
key to scroll through menu, select the parameter you want to set (Refer to Setup Menu section).
…………
Parameter
…………
Page number
