BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER
2
Keypad
The meter has a succinct membrane keypad, names and symbols describe the each function key controls.
MEAS|
■
Power the meter ON/OFF.
■
Freezes the measured value on the display, press the key again to resume measuring.
■
In the calibration or temperature setting mode, exits current mode and returns to measurement.
MODE|
o
C
■
Toggles between available measurement modes (pH, mV, ORP, Ion, Conductivity, TDS, Salinity, Resistivity, DO)
■
Press and hold the key to set the temperature.
CAL|
■
Press the key to enter the calibration mode.
■
Press and hold the key to enter the setup menu.
MI|
■
Press the key to store current measured value.
■
Press
key in setup mode to scroll up through menu.
■
Press
key in temperature setting mode to increase the setting value.
MR|
■
Press the key to view calibration report or stored data.
■
Press
key in setup mode to scroll down through menu.
■
Press
key in temperature setting mode to decrease the setting value.
ENTER
■
Confirms the calibration, setting value or displayed option.
■
Press and hold the key to turn On/Off the backlight.
Connectors
Bante900P portable meter provides 3 connectors for connecting the various types of sensors. Listed in the below table are the details of
these connectors.
2
1
3
