BANTE900P PORTABLE MULTIPARAMETER WATER QUALITY METER
4
■
For the Conductivity Electrode or Dissolved Oxygen Probe:
Insert the 6-pin connector into corresponding connector socket, ensure the connector is fully seated.
Preparation of pH Standard Buffer Solutions
Bante900P portable meter is packaged with three pH buffer packets required for calibration.
Open the pH7.00 buffer packet, place the powder into a 250ml volumetric flask. Pour distilled water 250ml to scale line, mix the solution
until reagent is completely dissolved.
Preparation of pH4.01 and 10.01 standard buffer solutions are the same as above. Prepared standard buffer solutions should be stored in
hermetically sealed glass containers.
