Figure 41. Connection Tab
Note:
The recommended minimum RPI is 100 msec.
3. If the module configuration was successful, the following information displays:
Figure 42. Successful Configuration
Module Defined Tags
C = Configuration (not used)
I = Inputs to PLC (outputs from the device)
O = Outputs from PLC (inputs to the device)
6.1.4 Assembly Objects
Inputs to the Sensor (Outputs from the PLC)
PLC Assembly Instance 112 (0×70) - 40 Registers (ZMX Inputs/PLC Outputs) O > T
This Assembly Instance includes parameters to control the ZMX sensor.
Table 2: PLC Assembly Instance 112 (0×70)
WORD #
WORD NAME
DATA
TYPE
RELEVANT
INPUT BITS
RANGE & INFO
0
16 bits
1
reserved
16-bit INT
ZMX Series 3D Time of Flight Sensor
34
www.bannerengineering.com - Tel: + 1 888 373 6767
