Figure 39. Comm Format
b) Enter a module
Name
and
IP address
.
The default IP address is 192.168.0.10 with a subnet mask of 255.255.255.0.
c) Under Connection Parameters, enter the
Assembly Instance
parameters and
Size
parameters.
PLC Input Assembly 100 (0×64), size 68 words
PLC Output Assembly 112 (0×64), size 40 words
PLC Configuration Assembly 128 (0×64), size 0 words
Figure 40. New Module Window
d) On the
Connection
tab, set the
Requested Packet Interval (RPI)
and select the
Use Unicast Connect over
EtherNet/IP
checkbox.
ZMX Series 3D Time of Flight Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767
33
