Figure 35. Module Definition—Data Type
15. Click
OK
twice and download the program to the PLC.
Figure 36. Download to the PLC
The connection looks like the one in
on page 31.
6.1.3 EtherNet/IP Configuration Using Generic Ethernet Module
To create an implicit Class 1 configuration to the ZMX using EtherNet/IP when using a ControlLogix family PLC, configure the
ZMX as a “Generic Ethernet Module”. The following is a sample setup of a Banner device using RSLogix5000
®
or Studio
5000 Logix Designer software:
1. Add a generic Ethernet module to the PLC's Ethernet card.
a) Right-click and select
New Module
.
ZMX Series 3D Time of Flight Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767
31
