5. Enter the dimensions of the container (in mm) in the
Size
field.
It is best practice to use slightly smaller X and Y measurements than the inner dimensions of the container.
The white box in the view updates in size.
Note:
If the box is not visible, click
.
6. Enter the desired
Fill Level
and
Peak Height
limits.
The lines on the
Fill
and
Peak
bar graphs update.
Note:
Allow the sensor to warm up for 15 minutes to ensure optimal sensor performance.
ZMX Series 3D Time of Flight Sensor
10
www.bannerengineering.com - Tel: + 1 888 373 6767