Installation and wiring
Information about the device's environment
•
Observe the notes and regulations regarding the power supply and functional ground.
•
Observer the specified bend radius when connecting cables.
•
Ventilation openings are not permitted to be covered or blocked.
•
The device is only permitted to be operated in closed rooms and not permitted to be exposed to direct
sunlight.
•
The climatic ambient conditions and environmental conditions must be taken into account –
General installation instructions
•
When installing the device, the permissible mounting orientations must be observed -
•
The device must be installed in such a way that it can be optimally viewed by the user.
•
The device must be installed in such a way that reflections on the screen are avoided as far as possible.
•
When installed in a closed housing, there must be sufficient volume for air circulation -
.
•
When connecting installed or connected peripherals, follow the instructions in the peripheral device's doc-
umentation.
Information about leak tightness
Warning!
Failure to follow instructions can result in damage to property.
•
The gasket must be inspected before installation or reinstallation and at regular intervals according to the
requirements of the operating environment.
•
Replace the entire device if inspection reveals visible scratches, cracks, dirt deposits or excessive wear.
•
Do not stretch the gasket unnecessarily.
•
It is important to ensure that the gasket is correctly seated all around.
•
The housing components must be secured using the specified tightening torque.
Transport and storage
Condensation may form under certain environmental conditions or rapid climatic changes. For im-
proved acclimatization and to avoid damage, the device must be slowly adapted to the room temper-
ature.
When transporting at low temperatures or in the event of large temperature fluctuations, the collection of moisture
in or on the device is not permitted. Moisture can cause short circuits in electrical circuits and damage the device.
If a device is transported or stored without packaging, all environmental influences such as shocks, vibrations,
pressure and moisture have an unprotected effect on the device. Damaged packaging indicates that the device
has been severely affected by environmental influences and may have been damaged.
This can result in malfunctions of the device, machine or system.
Use of third-party products
If third-party devices or components are used, the relevant manufacturer's documentation must be observed. If lim-
itations or interactions by or with third-party products are possible, this must be taken into account in the application.
72
Automation Panel 9x3 User's manual 2.01
