Accessories
9.5 Line filter
9.5.1 5AC804.MFLT-00
9.5.1.1 General information
Line filter 5AC804.MFLT-00 may be necessary to meet maritime requirements regarding conducted interference
emissions in power supply line per DNV.
The line filter should be installed as close to the end device as possible; the supply line from the end device to the
line filter should be kept as short as possible.
9.5.1.2 Order data
Order number
Short description
Figure
Accessories
5AC804.MFLT-00
Line filter
9.5.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Order number
5AC804.MFLT-00
General information
Certifications
CE
Yes
UKCA
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
DNV
Temperature:
B
(0 - 55°C)
Humidity:
B
(up to 100%)
Vibration:
A
(0.7 g)
EMC:
B
(bridge and open deck)
2)
LR
ENV3
KR
Yes
ABS
Yes
BV
EC31B
Temperature: 5 - 55°C
Vibration: 0.7 g
EMC: Bridge and open deck
EAC
Product family certification
Terminal block
Connection cross section
With wire end sleeves
1.5 mm²
Flexible
0.2 to 1.5 mm²
Inflexible
0.2 to 2.5 mm²
Electrical properties
Nominal voltage
24 VDC (-25% / +30%), SELV
3)
Nominal current
8 A
Overvoltage category per EN 61131-2
II
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Ambient conditions
Temperature
Operation
-25 to 65°C
Storage
-25 to 65°C
Transport
-25 to 65°C
Mechanical properties
Housing
Material
Galvanized plate
Automation Panel 9x3 User's manual 2.01
95