Technical data
4.1.5.1.3 Panel In interface
The interface is designed as a DVI-I connector (female) and can be operated with DVI-D or SDL transmission
technology.
For additional information, see sections
Video signals SDL and DVI are available for the following link modules: 5DLSDL.1001-00. For details, see the
technical data for the link module or panel used.
Pin Pinout
Description
Pin Pinout
Description
1 TMDS data 2-
DVI lane 2 (negative)
16 HPD
Hot plug detection
2 TMDS data 2+
DVI lane 2 (positive)
17 TMDS data 0-
DVI lane 0 (negative)
3 TMDS data 2/4 SHIELD
Shield for data pairs 2 and 4
18 TMDS data 0+
DVI lane 0 (positive)
4 SDL-
SDL lane (negative)
19 TMDS data 0/XUSB1
SHIELD
Shield of data pair 0 and USB1
5 SDL+
SDL lane (positive)
20 XUSB1-
USB lane 1 (negative)
6 DDC clock
DDC-based control signal (clock)
21 XUSB1+
USB lane 1 (positive)
7 DDC data
DDC-based control signal (data)
22 TMDS clock shield
Shield of clock pair
8 Not connected
Not connected
23 TMDS clock+
DVI clock (positive)
9 TMDS data 1-
DVI lane 1 (negative)
24 TMDS clock -
DVI clock (negative)
10 TMDS data 1+
DVI lane 1 (positive)
C1 Not connected
Not connected
11 TMDS data 1/XUSB0
SHIELD
Shield of data pair 1 and USB0
C2 Not connected
Not connected
12 XUSB0-
USB lane 0 (negative)
C3 Not connected
Not connected
13 XUSB0+
USB lane 0 (positive)
C4 Not connected
Not connected
14 +5 V power
1)
+5 V power supply
C5 Not connected
Not connected
15 Ground (return for +5 V,
HSync and VSync)
Ground
-
-
1)
Protected internally by a multifuse.
Information:
Hot plugging output devices on the interface for service purposes is supported by the hardware and
graphic drivers of approved operating systems. Recalibration may be required for touch screen de-
vices.
A maximum of 100 mating cycles are specified for this interface.
It is important to note the following information about the transfer rate:
•
In SDL operation without USB type A/B cable, the USB transfer rate is limited to USB 1.1.
•
A USB transfer rate of USB 2.0 is possible in DVI or SDL operation with a USB type A/B cable.
36
Automation Panel 9x3 User's manual 2.01
