B&R Industries Provit 5000, User Manual

Page: 135 / 400

134 Provit 5000 User’s Manual
Controllers • Bus Unit
To calculate the IPC's current requirements and power consumption, select all installed
components from this table and list them e.g. as shown below (a power supply with a 24 VDC
supply voltage is required):
With this structure, you have four current values (one for each voltage supply), which are
multiplied with the associated voltages to determine the power consumption (P = U * I).
You then add the power ratings for the respective supply voltages, which results in the total
power consumption for the IPC.
Please note, that maximum values for current requirements and power consumption, listed in the
"Current Requirements of the Components" table must not be exceeded!
Components
Current Requirements for Supply Voltage
+5 V -5 V +12 V -12 V
Mainboard with 8 MB DRAM (SIMM) 2 A - 0.1 A 0.1 A
Intel Pentium 100 MHz with 24 VDC Supply 2 A - - -
Interface Board 0.5 A - 0.1 A -
Hard Disk 0.5 A - - -
Disk Drive 0.1 A - - -
Display Units 5D5200 Series 10.4" TFT 0.5 A - 0.5 A -
Current Requirements 5.6 A - 0.7 A 0.1 A
Power Consumption (P = U * I) 28 W - 8.4 W 1.2 W
Total Power Consumption 37.6 W
Table 100: Example for current requirements and power consumption