B&R Industries Provit 5000, User Manual

Page: 83 / 400

82 Provit 5000 User’s Manual
Controllers • System Unit with Socket 7 (ZIF)
Interfaces
COM1
COM2
LPT1
USB
Panelware
Keyboard
Mouse
External Disk Drive RS232, 16 Byte FIFO
RS232, 16 Byte FIFO
SPP, EPP and ECP modes
2 USB ports
4)
Up to 8 Panelware keypad modules (daisy chained)
Enhanced AT PS/2
PS/2
Yes
VGA Controller Chips & Technologies C&T65550
5)
Graphic Memory 1 MB 2 MB 2 MB
Interfaces FPD (Panellink) + CRT (15 pin VGA DSUB connector)
Hard Disk / Silicon Disk
Slots 1 2
1) The quartz used with the IPC has an accuracy of 10 ppm. This means after influences such as operating temperature and wiring of the
quartz have been taken into account, the inaccuracy is typically 2 seconds per day.
2) When using SIMM modules with an operating voltage of 3.3 V and 5 V respectively.
3) Only the 256 KB L2 cache is available for IPCs with a revision number
≤
34.03.
4) Only for system units with revision
≤
34.03; otherwise not available
5) The VGA controller C&T65548 with 1 MB graphic memory is used for system unit 5C5001.01 with a revision number
≤
21.01.
Controller IPC5000 IPC5600
Table 45: Technical data for system units (cont.)with socket 7 (ZIF)