B&R Industries Provit 5000, User Manual

Page: 93 / 400

92 Provit 5000 User’s Manual
Controllers • System Unit with Socket 7 (ZIF)
Because of general PC specifications, this interface should be handled with extreme
care with regard to EMC, location of cables etc. Therefore, it should be only used for
service.
Make sure the connections for the PS/2 keyboard and PS/2 mouse are not swapped.
No device is allowed to be connected that uses the PS/2 keyboard supply as a power
source.
7.13 VGA Controller
The VGA controller is integrated onto the mainboard and offers high graphic performance
through the connection with the PCI bus.
Outputs are available for two display devices:
7.13.1 FPD Connection:
A Provit 5000 flat display can be connected on this Panellink interface (see Chapter 3 "Display
Units").
Controller Provit 5000 Provit 5600
System Unit 5C5001.01 5C5001.03 5C5601.01
Manufacturer Chips & Technologies
Model C&T 65550
1)
1) The VGA controller C&T65548 with 1 MB graphic memory is used for a 5C5001.01 system unit with a revision number
≤
21.01.
C&T 65550
Graphic Memory 1MB 2MB 2MB
Interfaces FPD (Panellink) + CRT (15 pin VGA DSUB)
FPD (Panellink) + CRT
(15 pin VGA DSUB connector)
Table 60: VGA Controller