Home
/
B&R Industries
/
Provit 5000
/
User Manual

B&R Industries Provit 5000, User Manual, Page: 341 / 400

Share

Page: 341 / 400

B&R Industries Provit 5000 User Manual Download Page 341

340

Provit 5000 User’s Manual

Accessories • Remote CD ROM / LS -120 Drive 5A5003.02

4.2 Mounting Instructions

The remote CD ROM / LS-120 drive can be mounted both vertically and horizontally (tolerance
12°; see figure "Mounting Vertical / Horizontal Remote CD ROM / LS-120 Drive").

4.3 Mounting Methods

It is possible to mount the remote CD-ROM LS-120 drive in two different ways.

4.3.1 Table Mounting

Four rubber feet are included in the delivery to facilitate this mounting option for standard devices
(5A5003.02).

4.3.2 Mounting with Front Cover

The front cover must be ordered separately (5A5003.03). The material for mounting is enclosed.

Figure 206: Mounting instructions for remote CD ROM / LS-120 drive (vertical/horizontal)

Figure 207: Mounting method with front cover

«
...
339
340
341
342
343
...
»

Summary of Contents for Provit 5000

















































































































































































































































































































































































































Reviews:

No comments