47
Parameterization
15 2 2 Brake closed time (CT) parameterization
After the open time, set the closed time of the brake (CT). It
determines the speed of load lowering when the brake is closed.
Cable a load that is available in normal operation until just
before the winch's guide pulley.
Press the switch "Stutter brake" away from the body and
hold the switch in this position.
The brake is alternately opened and closed again. If the load
lowering is too slow during this period, the closing time
must be reduced.
To reduce the closed time, press the switch "Stutter brake"
away from the body and hold the switch in this position.
Also briefly touch the switch for "Gas +". Every time "Gas +"
is touched the closed time is reduced by roughly 1/10 of a
second. As a result the load lowering is quicker.
To extend the closed time, press the switch "Stutter brake"
away from the body and hold the switch in this position.
Also briefly touch the switch for "Gas –". Every time "Gas –"
is touched the closed time is extended by roughly 1/10 of a
second. As a result the load lowering is slower.
After releasing the switch, the values are automatically
saved; however, they can be changed again at any time.
Stutter brake switch
Gas + / "Gas–" switch
Brake closed time (CT) parameterization
