B&B F10 Operating Instructions Manual Download Page 64

Page: 64 / 76

Operation

Switch the transmitter off by pressing the ON/OFF switch

towards "OFF" (O).

Switch the transmitter back on by pressing the ON/OFF

switch towards "ON" (I).

The siren and the "Emergency" output are switched off. The

alarm is reset.

17 3 15 Switch off "Passive emergency"

If you switch off the passive emergency monitoring

once the deactivation is saved (even with the transmit-

ter or receiver switched off). Then

no more emergency

calls

are transmitted with passive emergency criteria.

If the function is required again then it must be reac-

tivated.

Status LED

Operating level LED

Switch off "Passive emergency"

The transmitter must be switched off.

Press the switch ("Release brake") towards the body and

hold the switch in this position.

Press the switch ("Gas –") towards the body and hold the

switch in this position.

Press the ON/OFF switch towards "ON" (I) and keep it in this

position.

Status LED lights up green.

Operating level LED lights up orange.

Let go of all 3 switches so that they go back to their resting

position.

The operating level LED lights up red and the siren is trigge-

red briefly twice.

Passive emergency is deactivated and the transmitter swit-

ches itself off again.

Switch the transmitter back on (see operation / F10 S

transmitter) as soon as you want to resume your work.

Details: See function description / functions / function passive

emergency call ("passive emergency")

Summary of Contents for F10













































































Search results

Summary of Contents for F10

Reviews:

Related manuals for F10

Brands by name

Popular brands

B&B F10, Operating Instructions Manual

Search results

Summary of Contents for F10

Reviews:

Related manuals for F10

Brands by name

Popular brands