B&B F10 Operating Instructions Manual Download Page 55

Page: 55 / 76

Operation

17 3 3 "Permanent brake release"

Operating level 1 (green background)

Via function "Release brake"

Status LED

Operating level LED

Release brake command

Press the switch and hold it for longer than 1.5 or 3.5 s

(depending on the pre-parametrized winch type).

The brake remains permanently opened until "Release

brake" or "Pull drum" is pressed again

If the transmitter is not operated during the parame-

terized stand-by period (factory setting: 20 minutes; pas-

sive emergency = OFF) it switches itself off automatically

and the brake closes.
If the function "Release brake without permanent brake

release" is parametrized at the factory, "Permanent

brake release" can only be performed through operating

level 2.

Operating level 2 (gray background)

Status LED
Operating level LED

Permanent brake release command through operating level 2 (2-switch operation)

Press the ON/OFF switch towards "ON" and keep it in this

position.

Operating level LED lights up green.

Press the switch briefly. The brake remains permanently

opened until "Release brake" or "Pull drum" is pressed again

(operating level 1: release ON/OFF switch).

If the transmitter is not operated during the parame-

terized stand-by period (factory setting: 20 minutes; pas-

sive emergency = OFF) it switches itself off automatically

and the brake closes.

Details: See function description / functions / release brake

Summary of Contents for F10













































































Search results

Summary of Contents for F10

Reviews:

Related manuals for F10

Brands by name

Popular brands

B&B F10, Operating Instructions Manual

Search results

Summary of Contents for F10

Reviews:

Related manuals for F10

Brands by name

Popular brands