10
Safety notes
DANGER!
Danger from cutting off and restoration of the power
supply for the transmitter/receiver
Nobody should be located around the intake zone of the
cable winch!
Keep a safe distance from the cable winch.
Wear protective work clothing suitable for the activity and
the deployment location (PPA).
Before switching on the wireless control, ensure that nobody
could be put at risk from operation.
Always work with a direct line of sight to the machine and
proceed with particular caution if you are not yet familiar
with operating the wireless control.
Ensure that you do not accidentally mix up the cable mo-
vement directions when changing locations or confuse the
two sides when using double-drum winches.
To ensure that a work phase ends and consequently safe
conditions can be established on site in the highly unlikely
event of total failure of the battery, it is recommended that
you always carry two spare batteries and the manual control
for the winch with you in the vehicle.
The
stop and emergency call switch
on the transmitter
only affects the winch and is
not
to be confused with the
machine's emergency-off
Any non-observance of the safety information may result in
serious accidents and injuries.
In addition to generally applicable regulations for accident
prevention, the local regulations should also be observed.
Follow the instructions in the section "Maintenance".
Only use the wireless control within the climatic, environ-
mental conditions that are specified in the section "Techni-
cal data".
DANGER!
Danger from unintentional triggering of functions or
starting up
Ensure that no unintended actuation of the transmitter
can be caused by items of clothing and similar items.
Switch the transmitter off during break times and at the
end of work and secure it against unauthorized access
(e.g. from children).
Make sure that the receiver is unplugged while driving.
Requirements for safe operation
