34
Mechanical structure
10 Mechanical structure
10 1 F10 S transmitter
Belt plate
Stop and emergency call switch
Switches for commands
Battery compartment screw cap
F10 transmitter mechanical design
The transmitter of the F10 remote control consists of a plastic
housing (polyamide 66-GF+TPE) with protection class IP65. Vie-
wed from the perspective of the user, the belt plate for feeding
through the waist belt is located on the device's rear, the stop
and emergency call switch is on the left side, and the battery
compartment with the screw cap is on the right.
Operation is conducted using the switches on the top.
10 2 F10 E receiver
F10 receiver mechanical design
Mounting clips
Cable screw thread
Diagnostics LED
ON/OFF switch
The receiver of the F10 remote control consists of a two-part
plastic housing (PC / ABS) with protection class IP65. 3 moun-
ting clips are provided for mounting. The receiver can be
switched on or off via a toggle switch. A diagnostics LED idicates
various operating states and faults. The cable entry of the
2.3-m-long connection cable is realized by the means of a cable
gland.
