25
Functional Description
8 2 2
Release brake
The function "Release brake" (release winch brake) is
started by holding the switch in the direction of this
icon and is stopped by releasing the switch (jog mode).
Permanent brake release
By holding the switch for a long period (longer than the period
parametrized at the factory for permanent brake release), the
brake is permanently released until new actuation (release brake
or pull drum).
If the transmitter is not operated for longer than the parame-
trized stand-by period (factory setting: 20 minutes), the "Per-
manent brake release" function is automatically ended and the
brake closes again (passive emergency = OFF).
The following functions are parametrized at the factory
(depending on winch type):
Single functions (EF):
With the "Pull drum" command only the output "Pull drum" is
activated. The brake of the winch releases automatically.
Dual function (DF):
Activating the "Pull drum" command also activates the "Release
brake" command.
Depending on the winch type, the operating mode and time for
permanent brake release are parameterized at the factory:
Table: Winch-dependent parameterization (at the factory)
Winch type
Operation mode
Single function (EF) /
dual function (DF)
Duration of perma-
nent brake release
AMR/BGU/
Uniforest
EF
3.5 s
Farmi
EF
1.5 s
Fransgard
EF
3.5 s
GVS
DF
1.5 s
Holzknecht
EF
1.5 s
Igland
DF
1.5 s
KMB
EF
3.5 s
Krpan/Oehler
EF
3.5 s
Maxwald
EF
1.5 s
Pfanzelt
DF
1.5 s
Ritter (old)
DF
1.5 s
Ritter KWF
DF
1.5 s
S&R
DF
1.5 s
Tajfun
EF
3.5 s
Welte
DF
Only in operating
level 2
Werner/
Glogger
DF
1.5 s
