24
Functional Description
What to do in case of a device malfunction
In the case of an error in the safety critical function or
the internal self-monitoring function, you must stop
operation of the system immediately!
Send the system to the factory for repairs. To specify
faults please use the form enclosed. You can download a
corresponding response form at our website at
http://www.funk-im-forst.de/service.
ON/OFF switch
O = OFF
I = ON
All outputs except "Emergency" are monitored for
functionality or short circuits and indicated by the diag-
nostics LED in the event of failure. The "Siren" output is
not monitored due to the factory setting; but it can be
parameterized to be monitored.
If an emergency call device is connected, it monitors the
connection line between receiver and emergency call
device.
Do not apply any voltage to the outputs!
8 2 Functions
8 2 1
Pull drum
The function "Pull drum" (the pulling in of the winch's
cable) is started by holding the switch in the direction
of this icon and is stopped by releasing the switch (jog
mode).
Diagnostics LED blink sequence red, orange:
- Siren monitoring has triggered
--> Check fuse Si5 and supply line to the siren
Diagnostics LED blink sequence red, red, orange, orange:
- Monitoring of relay outputs has triggered
--> Check main fuse Si1 and relay outputs
Diagnostics LED blink sequence red, red, red, orange, orange,
orange:
- Device malfunction
--> Contact service
