Balluff BOS R080K-UIM-RE10 Series, Manual

Page: 179 / 212

www.balluff.com 73 english
5
Secondary Device Functions (continued)
5.9.5 System Commands
Command Value Device Action
0x81 (129) Application Reset – Resets the
Voltage Monitoring Detection Time
Duration
with ISDU-index 0x2200 to
the default value 10.
0x82 (130) Reset Factory Settings – Resets the
Voltage Monitoring Detection Time
Duration
with ISDU-index 0x2200 to
the default value 10.
Tab. 5-44: Voltage and current monitoring – System Commands
For an overview of all System Commands, see section 3.5
on page 24.
5.9.6 Events
Event Code Event Type Description Device Status
0x5110
(20752)
Warning Primary supply voltage exceeded
►
Check for deviations in the supply.
2 – Out-of-Specification
0x5111
(20753)
Warning Primary supply voltage below minimum value
►
Check for deviations in the supply.
2 – Out-of-Specification
0x8D0B
(36107)
Warning Short circuit at pin 2
►
Check wiring.
2 – Out-of-Specification
0x8D0D
(36109)
Warning Incorrect load/cable breakage, analog current output pin 2
►
Check wiring or connected devices.
2 – Out-of-Specification
Tab. 5-45: Voltage and current monitoring – Events
BOS R080K-UIM-RE10-…
Photoelectric Sensors