Balluff BOS R080K-UIM-RE10 Series, Manual

Page: 115 / 212

www.balluff.com 9 english
3
Overview of IO-Link Data and Functions (continued)
3.2 Device Variants
Variant Device ID Baud rate No. of
PDInput
No. of
PDOutput
IO-Link protocol
version
Minimum cycle
time
Variant 1 0x040C02 COM3 (230.4 kbit/s) 1 byte 1 byte 1.1.2 3 ms
Variant 2 0x040C0D COM3 (230.4 kbit/s) 1 byte 1 byte 1.1.2 3 ms
Variant 3 0x040C0E COM3 (230.4 kbit/s) 17 bytes 1 byte 1.1.2 5 ms
Variant 4 0x040C0F COM3 (230.4 kbit/s) 6 bytes 1 byte 1.1.2 5 ms
Variant 5 0x040C12 COM3 (230,4 kbit/s) 17 bytes 1 byte 1.1.2 5 ms
Tab. 3-1: Device Variants
3.3 Process Data Profiles
Setting the process data profile is described in section 6.7
Process Data Info and Configuration .
3.3.1 Variant 1 (AdSS)
PDInput
Byte 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reserved
SSC1 (ADSS1)
PDOutput
Byte 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reserved
Transducer
Enable
3.3.2 Variant 2 (LSSC)
PDInput
Byte 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
System Err
or
Reserved Reserved
Signal
Quality Bad
Reserved Reserved
SSC2 (LSSC2) SSC1 (LSSC1)
PDOutput
Byte 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reserved
Transducer
Enable
BOS R080K-UIM-RE10-…
Photoelectric Sensors