Balluff BML SL1-ALZ-ZZ Series, User Manual

Page: 83 / 254

www.balluff.com 31
Teach-In
1.
Use Tl Select to select the desired switching signal (1
to 4).
2.
Move the head to the turn-on position.
3.
Execute the Single Value Teach SP1 (0x41) command
(see System commands on page 27).
4. Move the head to the turn-off position.
5. Execute the Single Value Teach SP2 (0x42) command
(see System commands on page 27).
You can check your steps using the Teach-In
Result parameter.
7.5.3 Output configuration
Both BML outputs can be configured.
Index Subindex Name Size Access Values
Output Type
0x00B4 (180)
1 Out 1 1 byte Read/Write 0 = Disabled
1 = PNP (default)
2 = NPN
3 = Push-Pull
2 Out 2 1 byte Read/Write 0 = Disabled
1 = PNP (default)
2 = NPN
3 = Push-Pull
Tab. 7-10: Output configuration
7.5.4 Diagnostics suppression
If diagnostics functions cause problems in the application,
these functions can be suppressed.
For diagnostic events implemented in the BML see Event
list
on page 35.
Index Subindex Name Size Access Values
Diagnosis
Suppression
Configuration
0x00F8 (248)
1 Suppression Level 1 byte Read/Write 0 = All events active (default)
1 = Messages suppressed
2 = Messages and warnings suppressed
3 = All events suppressed
2 PD Invalid Suppression 1 byte Read/Write 0 = PD Invalid active
1 = PD Invalid suppressed
Tab. 7-11: Diagnostics suppression
7
IO-Link Smart Sensor profile Ed. 2 (BML SL1-ALZ1-UE/MZZ-_U1L-…) (continued)
BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
english