Balluff BML SL1-ALZ-ZZ Series, User Manual

Page: 82 / 254

30
7.5.2 Switching Signal Configuration (SSC)
Before beginning the switching signal
configuration the measurement value
configuration (see Section. 7.5.1) must be
completed!
4 switching signals are integrated in the BML. Each
switching signal is described by the two parameters
( Parameter and Configuration ). The BML has converted
the switching signals as window mode according to the
Smart Sensor profile.
Fig. 7-2:
SSC
SP1 SP2
OFF OFF ON
Measured
value
Hysteresis Hysteresis
SSC hysteresis
Parameters Subindex Name Size Access Values
SSC Parameter
SSC1: 0x003C (60)
SSC2: 0x003E (62)
SSC3: 0x4000 (16384)
SSC4: 0x4002 (16386)
1 Setpoint 1 (SP1) 4 bytes Read/Write 32-bit integer value [µm]
2 Setpoint 2 (SP2) 4 bytes Read/Write 32-bit integer value [µm]
SSC Configuration
SSC1: 0x003D (61)
SSC2: 0x003F (63)
SSC3: 0x4001 (16385)
SSC4: 0x4003 (16387)
1 Logic 1 byte Read/Write 0 = Normally open (no, default)
1 = Normally closed (nc)
2 Mode 1 byte Read/Write 0 = Disabled
2 = Window mode (default)
3 Hysteresis 2 bytes Read/Write 100…30000 μm (default: 100 µm)
Tab. 7-8: Parameter data SSC
In SIO mode SSC1 and SSC2 are set to the
outputs OUT1 and OUT2.
The BML supports Single-Teach functions in accordance
with the Smart Sensor profile. For this Teach-In procedure
two additional parameters are used (TI Select and TI
Result, see Tab. 7-9).
Index Subindex Size Access Values
TI Select
0x003A (58)
0 1 byte Read/Write 0 or 1 = SSC1 (default)
2 = SSC2
3 = SSC3
4 = SSC4
TI Result
0x003B (59)
0 1 byte Read Only 0x00 (0) = inactive
0x11 (17) = Teach-In of SP1 successful
0x42 (66) = Teach-In of SP2 successful
0x07 (7) = Error
Tab. 7-9: Parameter data Teach In
7
IO-Link Smart Sensor profile Ed. 2 (BML SL1-ALZ1-UE/MZZ-_U1L-…) (continued)
BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
english